Skip to content Skip to footer
gfrp rebar suppliers in india

GFRP rebars in Delhi NCR deserve a close look because the region is building at a pace few places match. Metro lines, regional rapid rail, expressways, flyovers, underpasses and large commercial campuses are going up across Delhi, Gurugram, Noida, Ghaziabad and Faridabad. The climate adds its own stress, with summers above 45°C, winter nights that can drop into single digits and monsoon waterlogging in underpasses and drains. Gfrp bars in Delhi NCR help in these conditions because they do not rust, they are light enough to handle quickly on crowded sites and they do not conduct electricity.

This page covers what GFRP rebar is, how it performs, where it fits in metro, road and infrastructure work across the region, and what shapes gfrp price in Delhi NCR. It is useful whether you are a contractor sourcing material or an engineer specifying it for a project.

GFRB Rebar

What Are GFRP Rebars and How They Work

Glass fiber reinforced polymer bars in Delhi NCR are made from continuous high-strength glass fibers embedded in a polymer resin matrix, usually vinyl ester or epoxy. The fibers are drawn through resin and formed into a solid bar through pultrusion, then surface-treated so they bond mechanically with concrete. Structurally, GFRP gives concrete the tensile strength it lacks on its own, the same way steel does, without the corrosion risk.

Depending on diameter, tensile strength ranges from roughly 650 to 1,200 MPa. Smaller diameters (6 to 12 mm) sit at the higher end and larger diameters (16 to 25 mm) fall in the 650 to 700 MPa range. At around 80% lighter than TMT steel, the bars are easier to unload and place on congested urban sites, along live roads and inside existing metro or highway footprints where space and time are both limited.

Features

Icon

Lightweight

Icon

Corrosion-resistant

Icon

Strong

Icon

Cost-effective

Icon

Low Maintenance

Icon

Longer Life

Icon

Easy Handling

Icon

Strong Bond Strength

Icon

Customised Lengths

Icon

Non-Conductive

Icon

Non-Magnetic

Icon

Non-Electromagnetic

Manufacturing Capability & Quality Commitment

As one of the established gfrp rebar manufacturers in India, our process is built on precision pultrusion, controlled resin impregnation and consistent dimensions across every batch. Production is carried out under an ISO 9001:2015-certified quality system, and bars are made with reference to ASTM D7957 and ACI 440, since dedicated Indian standards for FRP reinforcement are still developing.

Among gfrp manufacturers, we are set up for both smaller orders and the bulk quantities that large infrastructure packages need. Diameters range from 6 mm to 25 mm, straight bars go up to 12 metres and select sizes come in coil form up to 100 metres.

Product Specifications

GFRP Rebar Product Specifications

0.065

Kg/mtr

GFRP Rebar Product Specifications
GFRP Rebar Product Specifications
6mm
GFRP Rebar Product Specifications

0.116

Kg/mtr

GFRP Rebar Product Specifications
GFRP Rebar Product Specifications
8mm
GFRP Rebar Product Specifications

0.175

Kg/mtr

GFRP Rebar Product Specifications
GFRP Rebar Product Specifications
10mm
GFRP Rebar Product Specifications

0.25

Kg/mtr

GFRP Rebar Product Specifications
GFRP Rebar Product Specifications
12mm
GFRP Rebar Product Specifications

0.45

Kg/mtr

GFRP Rebar Product Specifications
GFRP Rebar Product Specifications
16mm
GFRP Rebar Product Specifications

0.685

Kg/mtr

GFRP Rebar Product Specifications
GFRP Rebar Product Specifications
20mm
GFRP Rebar Product Specifications

1.07

Kg/mtr

GFRP Rebar Product Specifications
GFRP Rebar Product Specifications
25mm
GFRP Rebar Product Specifications

Upto 100 metres
(In coil form)

GFRP Rebar Product Specifications

Upto 12 metres (In staight bars)

GFRP Rebar Product Specifications

Diameter

GFRP Rebar Product Specifications

Length Available

GFRP Rebar Product Specifications

Unit Weight

Bend Bar

90 - Degree Bend

45 - Degree Bend

Hook Bend

Offset Bend

S Bend

U Bend

Bend

* Note : Actual weight may vary as per tolerances

Technical Specification of GFRP Rebars

FRP Rebar (6, 8, 10, 12 mm)

FRP Rebar (16, 20, 25 mm)

Sr. No. Properties UOM Tolerance IS 18256 : 2023 TSL GFRP Rebar
1
Glass Content
%
±5
≥ 75
≥ 80
1
Tensile Strength
Mpa
min.
700 – 850
1100 – 1200
3
Tranverse Shear Tensile
Mpa
≥ 130
130 – 200 Mpa
4
Tensile Modulus of Elasticity
Mpa
≥ 45000
45000 – 55000
5
Ultimate Tensile Strain
%
≥ 1.1
≥ 1.1
6
Glass Transition Temperature
oC
≥ 100
101-115
7
Moisture Absorption (short hrs.)
%
min.
≥ 0.25
≥ 0.25
8
Moisture Absorption (Iong term)
%
min.
≥ 1
≥ 1
9
Alkaline Resistance
Mpa
≥ 80 % of mean
ultimate tensile force
of pristine bars
≥ 80 % of mean
ultimate tensile force
of pristine bars
10
Bond Strength
Mpa
≥ 7.6
8-15
Sr. No. Properties UOM Tolerance IS 18256 : 2023 TSL GFRP Rebar
1
Glass Content
%
±5
≥ 75
≥ 80
1
Tensile Strength
Mpa
min.
550-650
16 mm ≥ 700
20 mm ≥ 650
25 mm ≥ 650
3
Tranverse Shear Tensile
Mpa
≥ 130
135 – 200 Mpa
4
Tensile Modulus of Elasticity
Mpa
≥ 45000
45000 – 55000
5
Ultimate Tensile Strain
%
≥ 1.1
≥ 1.1
6
Glass Transition Temperature
oC
≥ 100
101-115
7
Moisture Absorption (short hrs.)
%
min.
≥ 0.25
≥ 0.25
8
Moisture Absorption (Iong term)
%
min.
≥ 1
≥ 1
9
Alkaline Resistance
Mpa
≥ 80 % of mean
ultimate tensile force
of pristine bars
≥ 80 % of mean
ultimate tensile force
of pristine bars
10
Bond Strength
Mpa
≥ 7.6
8-15

Benefits of GFRP Rebar

gfrp rebar suppliers in india

Why Delhi NCR Is Shifting Away from Steel

Steel corrodes in Delhi NCR for reasons people often overlook. Underpasses, drains and foundations in low-lying areas stay wet for long stretches during the monsoon, and groundwater in parts of the region is brackish. Roads, viaducts and exposed slabs also deal with a wide temperature range between peak summer and winter. GFRP rebars in Delhi NCR remove the corrosion risk because the material does not rust or go through electrochemical corrosion. Its coefficient of thermal expansion, roughly 9 to 12 × 10⁻⁶/°C, is close to that of concrete, which suits a region with such a large seasonal swing.

The non-conductive and non-magnetic nature of GFRP is another reason it gets specified here. Substations, data centres in the Noida and Gurugram belts and hospital rooms with MRI equipment all benefit from reinforcement that does not interfere with electrical or magnetic systems. Independent studies also point to a service life beyond 100 years for properly designed GFRP-reinforced structures.

One point that matters a lot for this region: Delhi falls in Seismic Zone IV, a higher demand than many other cities. GFRP bars are linear-elastic and do not yield like steel, so they are not a direct one-to-one swap. Under ACI CODE 440.11-22, GFRP-reinforced members are permitted in Seismic Design Category A, and non-seismic-force-resisting members in Categories B and C. The code does not give general provisions for Categories D, E and F. For NCR projects, the structural engineer needs to confirm where GFRP is allowed and where steel or a project-specific approach is still required.

Within those limits, gfrp bars in Delhi NCR are used in underpasses, drains and utility chambers, road slabs and concrete pavements, retaining walls, and shaft or diaphragm wall sections that tunnel boring machines have to cut through.

Common Issues

Problems with TMT Rebars in a City Like Delhi NCR

GFRP Rebar Problems with TMT Rebars
CORROSION

TMT bars corrode in waterlogged underpasses, wet drains and brackish groundwater, and the rust cracks the surrounding concrete over time.

THEFT DURING TRANSIT AND ON-SITE

TMT bars are a common theft target on open sites and in transit, with reported losses as high as 20% on some projects.

LABOR-INTENSIVE INSTALLATION

Heavy steel loads are slow to unload and place on congested urban sites, and cutting and bending add more skilled labor hours.

RISING COSTS

Steel prices move with raw material and freight costs, which makes budgets for long infrastructure packages hard to hold.

CUTTING OF OPENING IN CONCRETE STRUCTURES

Making openings in TMT-reinforced concrete takes special tools and extra time.

SCRAP GENERATION AND WASTE

Cutting and bending TMT to fit the design leaves scrap that needs to be cleared from site.

MARKET PRICE VOLATILITY

Frequent swings in steel prices make procurement planning difficult.

Note :

unlike TMT, GFRP can be cut on site with a diamond blade or similar tool, but it cannot be bent or welded on site. Bends, hooks and offsets need to be pre-manufactured and ordered in advance.

GFRP BAR vs TMT BAR

PROPERTIESGrade 500GFRPCOMPARISON
Tensile strength MPa500 min800-1100Stronger
Weight/Meter 8mm0.395 kg0.099 kgLighter
Bar Length12 meterupto 100 metersBetter improvement
CostHigherLowerCost effective
Life Spend50 years(+) 80 yearsMore durable
Corrosion resistanceNoYesMore durable
Electric conductivityYesNoNo accidents risk
Thermal conductivityYesNoDoes not dissipate heat
Concrete covering35mm - 45mm20mmLower concrete volume
Shear Strength120170Higher
Bond strength MPa/N/mm2≥ 10≥ 7.6Lower
Compression MPa/N/mm2500450Lower
Modulus of Elasticity [Gpal160-20065Lower
Elongation [%]12% (min.)4% (max.)Lower
Density [ton/m3]7.81.9Lower
EMI/RFI TransparencyNOYesTransparent To EMI/RFI
Linear expansion coefficient, a*10-6/oC13-159-12Lower
Installation, Handling & Transport CostHighLowCost Effective
Environmental ImpactHighLow45% Less C02 emission

Spectrum of Applications

GFRP Rebar Spectrum of Applications

Marine & Coastal

Seawalls & Retaining Walls

Pile Foundations in Saltwater

Bridge Piers

Jetties, Ports & Harbours

Underwater Concrete Elements

Walkways & Decks in Coastal Zones

Tunnels and Underground Works

Tunnel Linings & Segments

Underground Retaining Structures

Soft Ground Support Systems

Utility Vaults & Shafts

Cut & Cover Tunnel Slabs

Mining Roof & Wall Stabilization

gfrp price in india
GFRP Rebar Roadways & Bridges

Roadways & Bridges

Bridge Decks & Approach Slabs

Crash Barriers & Parapet Walls

Roadway Slab Culverts

Median Barriers & Dividers

Expansion Joint Slabs

Retaining Walls for Flyovers

Industrial Plants

Chemical Storage Foundations

Cooling Towers & Water Basins

Industrial Flooring & Pavements

Wastewater Treatment Structures

Acidic & Corrosive Zone Slabs

Electrical Equipment Enclosures

GFRP Rebar Industrial Plants
GFRP Rebar Infrastructure

Infrastructure

Metro & Railway Platforms

Airport Runways & Taxiways

Utility Ducts & Drain Covers

Metro & Railway Platforms

Urban Flyovers & Underpasses

Retaining Walls & Noise Barriers

Water Supply & Sewerage Systems

Understanding GFRP Price in Delhi NCR

Gfrp price in Delhi NCR is quotation-based and not a fixed rate. It depends mainly on bar diameter, length, order volume, resin formulation and any custom bends or configurations. Larger diameters use more glass fiber and resin per metre, so pricing scales with size, and bulk orders are usually priced differently from small ones. Quotes from different gfrp rebar manufacturers are only comparable when diameter, length and quantity match.

Public infrastructure is built to last for decades, so lifecycle cost is the better way to compare. With a service life that can exceed 100 years under proper design and none of the corrosion-driven repair cycles that steel faces in wet and chemical-exposed locations, the total cost of ownership is often lower than steel.

GFRP Rebar Manufacturers in India
gfrp rebar manufacturers in india

Reliable GFRP Rebar Supply for Delhi NCR Projects

As one of the top gfrp rebar manufacturers serving infrastructure buyers, we support both small orders and large bulk requirements, backed by ISO-certified quality checks on every batch. Contractors and consultants comparing gfrp manufacturers for metro and road packages usually want datasheets and test reports, which we can provide as applicable to the project. Our team also works with structural engineers on detailing, handling and installation, especially around splicing, bend configuration and concrete cover.

Every batch of glass fiber reinforced polymer bars in Delhi NCR that we supply is checked for tensile strength, bond performance and dimensional consistency before it leaves the facility.

Need GFRP Rebar for Your Delhi NCR Project?

If you are planning to buy GFRP rebars in Delhi NCR, share your required diameter, length, quantity and delivery location with our team. GFRP Rebar Global is one of the trusted GFRP rebar manufacturers in India, and we will help you work out the right specification and a project-specific quote. Call today!

FAQs

GFRP rebar is a corrosion-resistant composite reinforcement made from glass fibers and polymer resin. GFRP rebars in Delhi NCR are used in underpasses, drains, road slabs, retaining walls, tunnel-related sections and buildings near sensitive electrical or magnetic equipment.

Delhi falls in Seismic Zone IV. ACI CODE 440.11-22 permits GFRP-reinforced members in Seismic Design Category A and non-seismic-force-resisting members in Categories B and C, and it does not give general provisions for Categories D to F. The structural engineer should confirm where GFRP is allowed for your building or structure.

Because GFRP is a composite and not steel, it is commonly specified for sections that a tunnel boring machine has to pass through, such as shaft or diaphragm wall openings. Whether it suits a particular station or shaft is a design decision for the project engineer. Our team can share technical data to support that review of glass fiber reinforced polymer bars in Delhi NCR projects.

Gfrp price in Delhi NCR depends on bar diameter, length, resin type, order quantity and any custom bends needed. We quote per project and not at a flat rate.

We are one of the established gfrp rebar manufacturers in India, with a focus on consistent batch quality, ISO 9001:2015-certified processes and dependable delivery for projects of any size.

Yes. We supply gfrp bars in Delhi NCR from 6 mm to 25 mm diameter, with straight lengths up to 12 metres and coil options up to 100 metres for select sizes. As gfrp rebar manufacturers, we keep quality consistent across order sizes.